150Ah LiFePo4 Battery

Description 150Ah LiFePo4 Battery for camping, 4x4, offroad trailers , caravans and motorhomes Recomended charger: Victron Blue Smart 12Volt 15 Amp charger This battery charge at 14.6V, discharge cut-off voltage is 10V, Recommend Charge Current 20Amp-50Amp Max continuous charge and discharge current is 100amp. peak discharge current is 250amp for 10 seconds. Nominal Voltage 12.8V Cycle Life ≥4000 cycles Discharge Cut-off Voltage 10.0V Operation Temperature Charge: 0~55℃ Discharge: -20~65℃ Storage: 0~45℃ Height 214mm x Width 172mm x Length 329mm Please note battery may NOT be installed inside engine bay. Not designed for a direct replacement of main car cranking battery. In general it is not advice to charge a Lithium battery directly from your vehicle alternator. The volts is high enough but the problem is some Lithium batteries will take whatever amps it can take. Most can charge at a 100 Amp charge rate, thus it will stress your alternator. It is always safe practice to charge a LiFePo battery via a DCtoDC charger or anything that can control the amps. For 220volt charger, get something that was designed for LiFePO4, like the Victron Blue Smart 12Volt 15 Amp charger with Bluetooth . When Using the Victron charger. Use the High Setting(14.7 Volts) NOT the LION setting If you do not have such a charger but have a charger with different settings, opt of the GEL Battery settings, I find that works best. Same with solar controller, if it does not have a LiFePo specific function, opt for GEL. Can not be connected in parallel.